In this version, the gutter base is made on site with a slope to the drains. Therefore, the gutter is almost self-cleaning.
Advantages of the standard version A1:
• The gutter height can be set exactly by means of the integrated adjustment screws (adjustable up to 50 mm from the standard dimension of the gutter)
• As a result, irregularities on the pelvic head can be optimally compensated
• Optimum connection of gutter and pool wall through precast concrete and stakes
• The channel bottom can be optimally made with a slope. This could eliminate the need for an external loop.
• Optimal for renovation
In this version, the gutter bottom is executed without a slope. An external loop is recommended.
• The gutter height can be set exactly using the integrated adjusting screws. (adjustable up to 50 mm from the standard gauge of the gutter).
• As a result, irregularities on the pelvic head can be optimally compensated.
• After adjustment, the gutter can be optimally connected to the pelvic wall by means of a double-sided joint closure and the introduction of a commercially available concrete mortar.
• Optimal for renovation and renovation.
In this version, the gutter bottom is executed without a slope. An external loop is recommended.
• This version can be max. Be compensated 5 mm in height.
• The gutter stone must be connected to the building with HILTI HIT.
• Not recommended for pool renovations.
• When installing on polystyrene bricks, a concrete ring must be concreted.